Skip to main content
GeoProGlobal Geodesy · Surveying
Service 03

Construction survey support

GeoProGlobal specialists support construction and installation works either continuously or through scheduled site visits. We transfer the design from drawings to the site, perform as-built surveys at each stage and monitor deformation of existing and new structures.

Response
24 h
Duty
24/7
Accuracy
±2 mm
When it is needed

Typical cases and tasks

These are the tasks we most often solve within this service.

Setting-out works

Transferring key points, construction axes and routes from drawings to the site with fixed design positions.

As-built surveys

Stage-by-stage verification of built work against the design, deviation detection and reporting for supervisory bodies.

Construction support

A surveyor on site throughout the work cycle: marking, installation control and interim surveys.

Deformation monitoring

Monitoring settlement, displacement and tilt in dense urban areas or near active construction.

Process

Stages and timelines

We manage the project end to end and deliver the full document package.

  1. 01Brief and mobilization

    Receiving the brief and selecting equipment and crew.

  2. 02Setting out

    Transferring the design to the site and fixing control points.

  3. 03Control

    As-built surveys by construction stage.

  4. 04Monitoring

    Deformation monitoring and report preparation.

  5. 05Site handover

    Final survey for commissioning and handover.

Result

What you receive

  • Setting-out schemes and site setting-out acts
  • As-built schemes and drawings
  • Deformation monitoring reports
  • Final as-built survey for handover
Equipment

Instruments used for this service

Leica TS06 Plus 5″ R500
Total station

Leica TS06 Plus 5″ R500

High-precision total station for topographic surveys, setting-out works and as-built surveys.

Equipment type
Total station
Angle accuracy
5″
Reflectorless range
up to 500 m
South Galaxy G7
GNSS receiver

South Galaxy G7

RTK receiver with IMU up to 60°, FIX reliability > 99.99%, base and rover operation.

RTK accuracy
8 mm + 1 ppm
FIX reliability
> 99.99%
Battery life
12–15 h
Regulations

Regulatory basis

  • №141-VIII ЗРК

    Law of Kazakhstan "On Geodesy, Cartography and Spatial Data"

    December 28, 2023

FAQ

Questions about this service

Can you provide a surveyor permanently on site?

Yes. We work in two formats: a full-time surveyor for the construction period or scheduled site visits. The minimum contract is one month.

Contact

Tell us about the site and we will prepare an estimate

By submitting the form, you consent to personal data processing.

Full brief and commercial proposal

Use the step-by-step estimate form and we will prepare a proposal with equipment, timelines and cost.

CallWhatsAppEstimate